Preparing the Farrowing Crate

Tips on preparing and organising the farrowing room from BPEX in the Work Instruction series (No. 3).
calendar icon 9 October 2012
clock icon 4 minute read

Providing the correct environment for both sows and piglets in the farrowing house will help to minimise mortality and maximise growth rate of the piglets and maintain the sow in good condition for the next cycle. A well prepared and organised farrowing room will make your role easier and more productive.

Equipment required Personal safety
Farrowing kit Sows can be unpredictable. Only competent staff should move sows/gilts into the farrowing house
Sow cards
Minimum/maximum thermometer

Sow records next to pen


Cleaned house with boards removed


Bedding behind/to side of sow


Creep area

Initial Checks

  • Ensure pressure washing, disinfection and drying of the entire room have taken place
  • Ensure pressure washing, disinfection and drying of all extra equipment such as scrapers and creep feeders have taken place
  • Ensure all fixtures are in good condition including the crates, drinkers troughs and flooring – repair or report damage to your manager
  • Ensure all sow and piglet drinkers are working and providing the relevant flow rate
  • Ensure all automatic feeders are working
  • Ensure the wiring on the creep lights has been checked
  • Ensure the lights, fans and heat mats are working effectively
  • Ensure the farrowing kit is replenished and readily available in the farrowing house
  • Ensure the room is warm, dry, draught-free and effectively ventilated

Outline of the Work

  • Move all required equipment into farrowing room
  • Replace all equipment in the correct place
  • Check creep lamps and heat mats are working
  • Move sow into crate and adjust crate to correct size for individual animal
  • Ideally, the sow/gilt should be put in the crate at least three days prior to farrowing
  • Place the history of each sow above/near the relevant farrowing crate
  • Move bedding from storage area to farrowing room
  • Check that the medicines store has adequate store of relevant drugs
  • Check availability of liquid colostrum, supplementary milk etc
  • Remove faeces from the crate at least once a day

When the sow or gilt shows signs of starting to nest or farrow:

  • Place enough bedding around the back of the sow to eliminate draughts and provide a comfortable, dry area for newborn piglets
  • Place a heat source towards the back and or side of each sow
  • Place the heat source in a position so that it cannot be reached by the sow and will not hinder your access to the sow
  • If using heat mats, turn on and check temperature with infra-red thermometer
  • Place bedding in creep, switch on lamps (creep, side and or rear) and check temperatures – it should be 30°C on the surface in the creep area

Additional Information

The Welfare of Farmed Animals (England) Regulations 2007 has specific requirements for farrowing including:

  • Pregnant sows and gilts must be thoroughly cleaned before being placed in farrowing crates
  • In the week before the expected farrowing time, sows and gilts must be given suitable nesting material in sufficient quantity unless it is not technically feasible for the slurry system used
  • During farrowing, an unobstructed area behind the sow or gilt must be available for the ease of natural or assisted farrowing
  • Farrowing pens where sows or gilts are kept loose must have some means of protecting the piglets, such as farrowing rails

Reference documents

The Welfare of Farmed Animals 2007, Defra - www.defra.gov.uk
The Farrowing House Tool Kit, BPEX - www.bpex.co.uk

October 2012

© 2000 - 2024 - Global Ag Media. All Rights Reserved | No part of this site may be reproduced without permission.