Development of an Air Filtration System for Swine Transport Vehicles to Protect Against Airborne Diseases During Transport26 June 2014
A review of the progress made at the Prairie Swine Centre, presented at the 33rd Centralia Swine Research Update. The necessary components have been identified and a prototype is now being tested.
The overall goal of this project is to protect high-value pigs during transport using a trailer with an air filtration system, according to B. Predicala and colleagues at the Prairie Swine Centre in Saskatoon.
A comprehensive literature search and a survey of various information sources on trailer filtration were conducted to identify components of a trailer air filtration system and the various options available for each component.
Using a set of relevant design criteria, the different options were evaluated to select the components included in the prototype design.
Presently, the proper components are being assembled for retrofit into the prototype trailer. Remaining steps to complete the project include prototype testing, design optimisation and feasibility analysis.
The growth and success of the Canadian pork industry over the past decades depended significantly on access to highly improved genetics. Transporting breeding stock is a daily occurrence across Canada, and individual farms have biosecurity procedures to reduce the potential for disease outbreaks. However, the risk of infection of the breeding stock during transport can be significant, particularly during passage through pig-dense areas, where disease outbreaks can still happen despite current biosecurity protocols in place.
Thus, it is imperative that measures be developed to protect breeding stock during transport, thereby avoiding infection of these high-value animals and the consequent significant economic loss and more importantly, to close this biosecurity gap through which potential infection can be introduced to high-health commercial herds.
The overall goal of this work is to design, develop, and evaluate an air filtration system that can be fitted to a transport vehicle to prevent infection of the high-value breeding stock during transport.
Results and Discussion
In this project, an air filtration system was designed and developed to filter the air entering an animal transport trailer in order to protect high-value animals from infection with airborne transmissible diseases during transport. A literature review supplemented with a survey of relevant resources (i.e. veterinarians, truckers, genetics companies, etc.) was conducted to compile information on existing and potential designs for an air filtration system for transport vehicles, followed by selection of best design based on comprehensive evaluation of various options available for each component of the filtration system.
Information on designs of air filtration systems of existing filtered animal transport vehicles was gathered from literature and by contacting and interviewing different contact persons and organistions with filtered trucks/trailers. Organisations based in Europe (France, Netherlands) and US were interviewed, which belonged to the following categories: swine genetics company; swine technical support/consulting firm/swine research; swine transport service and swine/livestock trailer/truck manufacturer.
The length of the filtered trailers from these organizations varied from 20 to 53 feet. The trailer/truck manufacturer based in Netherlands has multi-deck filtered trailers, which were used for transporting smaller pigs (around 23kg); the rest has one-deck filtered trailers.
Unfortunately, only the general design of its air filtration system was described and shared by the company.
From the literature search and survey results, the critical factors that need to be considered in the design of the ventilation and air filtration system for the trailer were identified as:
- animal spacing requirement and trailer capacity
- pig heat generation and equivalent air conditioning requirement
- ventilation requirement as a function of air temperature inside the trailer and pig size
- available filter technology and
- power generation needed to run the whole system.
The major parts of a trailer filtration system were four components for temperature control, filtration, ventilation and air distribution. Additionally, there are secondary components of the system that were identified, including components for air exhaust, emergency openings, parameter monitoring, cleaning & disinfection and bedding & watering supply.
Based on the designs of the surveyed trailers, the type of fans commonly used in these filtered trailers were axial fans. High efficiency particulate air (HEPA) filters and Di-Octyl Phthalate (DOP)-tested filters were the type of filters installed in these filtered transport vehicles, with five currently using HEPA filters. Typical source of power needed to operate the fans was the diesel-type generator.
After gathering all the available information on trailer components and the associated options for each component, the specific option that will be included in the design of the prototype system was selected by having each project team member evaluate the different options according to the following criteria:
- impact on trailer environment (air quality, air flow, thermal environment)
- power requirement, and
The project team evaluated each option and based on the ratings, the design of the air filtration system for the prototype trailer includes the following major components: non-air-conditioned, MERV filters, axial fans and no air diffuser.
In the current phase of the project, the required components of the trailer filtration system will be gathered and installed on the trailer. Ventilation system of the prototype design will consist of high-performance axial fans to overcome pressure drop across the filtration system. Incoming air will be filtered in a sealed chamber operating under negative pressure, and the filtered air will be distributed to the trailer decks. Air filtration will consist of minimum efficiency reporting value (MERV) 14 and MERV 16 air filters (90 to 95 per cent composite average particle size arrestance efficiency) and high efficiency particulate air (HEPA) filters.
Calculation of stocking density per deck, ventilation rate per deck, air velocity per deck, heat generation by pig per deck, and expected air temperature inside the trailer were done according to applicable recommended guidelines for Canadian conditions.
Comprehensive literature search and survey of different information sources on trailer filtration were conducted to identify the major trailer filtration components and the various options for each component.
Based on evaluation of the different options, the components included in the prototype design of the air filtration system that will be fitted to a swine transport trailer were selected. The prototype system will be installed in an actual livestock trailer and will be tested for effectiveness in preventing airborne-transmitted pathogens transmission during transport, and in providing suitable thermal environment to the animals under Canadian conditions.
Finally, after re-design and optimisation steps, a feasibility analysis will be conducted to assess the viability of installing air filtration systems on swine transport trailers.
Acknowledgements: The authors would like to acknowledge the Canadian Swine Health Board and the Canadian Agricultural Adaptation Program for the financial support to this research project. The authors also acknowledge the strategic funding provided by Sask Pork, Alberta Pork, Manitoba Pork Council and the Saskatchewan Ministry of Agriculture to Prairie Swine Centre Inc.
Predicala B., H. Bonifacio, S. Ekanayake and L. Whittington. 2014. Development of an air filtration system for swine transport vehicles to protect against airborne diseases during transport. Proceedings of 33rd Centralia Swine Research Update. II-36–II-37.
Read other papers from the Centralia Swine Research Update 2014 by clicking here.